obi 200 works for a little while an then goes to voice mail after some time
kucharosa:
I did configure through obitalk as well. So is the fact that I have configured via obitalk dashboard AND the local configuration is causing the issue?
drgeoff:
Quote from: kucharosa on November 14, 2020, 08:22:50 am
I did configure through obitalk as well. So is the fact that I have configured via obitalk dashboard AND the local configuration is causing the issue?
As per the title of the thread I linked to, you should one or the other. As the dashboard must be used to configure for Google Voice, many users stick with the dashboard. If you choose the local configuration you must also use it to disable Obitalk Provisioning. If it is notdisabled, sooner or later the dashboard (basic or expert) settings will be downloaded by the OBi and overwrite the settings made locally.
kucharosa:
Thanks. I disabled auto provisioning locally so obitalk dashboard settings should take effect but no change it now goes to voice right away. By the way not sure if this makes a difference but I am using a Hitron modem from Rogers. Thanks for your continued help. Any thoughts?
Sheffield_Steve:
If it was me. I would start again. Wipe out the config and use the "dashboard" to configure it. This will ensure that the settings are all correct.
drgeoff:
Quote from: kucharosa on November 15, 2020, 08:42:50 am
Thanks. I disabled auto provisioning locally so obitalk dashboard settings should take effect but no change it now goes to voice right away. By the way not sure if this makes a difference but I am using a Hitron modem from Rogers. Thanks for your continued help. Any thoughts?
You have not understood!
Disabling "Obitalk Provisioning" is for when you want to use the local configuration method. It prevents the portal dashboard from overwriting local settings. If you want to use the portal dashboard to configure, first ensure that the "Obitalk Provisioning" setting (which is only on the local page) is "System Start". Then use basic or expert mode on the dashboard to configure for your service provider.
Navigation
[0] Message Index
[#] Next page
[*] Previous page