Answer call on pots line?

(1/2) > >>

Trick:
A couple questions regarding a the pots line using the obi110. How do i pickup on a phone call already in progress on another phone using the pots line? I know i can dial **8 to dial out using that line, but how about accessing a call and switching to that line.

What configuration setting will turn off the pots line from ringing the obi110?

thanks for your help in advance

RonR:
Setting:

Physical Interfaces -> PHONE Port -> EnableLINEPortBargeIn : (checked)

will allow you to barge in on a LINE Port call that's in progress outside of the OBi by dialing #.

Setting:

Physical Interfaces -> LINE Port -> InboundCallRoute : {}

will prevent incoming calls on the LINE Port from ringing the PHONE Port.

Trick:
thanks for the quick response...

I am unable to access the 'phone' settings under physical interfaces. I'm getting a webpage error. All other categories work and won't load the phone settings. I tried three different internet browsers and settings are not showing up.

Ostracus:
Quote from: RonR on October 24, 2011, 03:08:45 pm

Setting:

Physical Interfaces -> PHONE Port -> EnableLINEPortBargeIn : (checked)

will allow you to barge in on a LINE Port call that's in progress outside of the OBi by dialing #.

Setting:

Physical Interfaces -> LINE Port -> InboundCallRoute : {}

will prevent incoming calls on the LINE Port from ringing the PHONE Port.



You can also click on the "enable" to turn on/off the port.

RonR:
Quote from: Ostracus on October 25, 2011, 09:28:17 am

You can also click on the "enable" to turn on/off the port.


That's not true.

If he disables the LINE Port, he will not be able to "pickup on a phone call already in progress on another phone using the pots line" or  "dial **8 to dial out using that line".  The LINE Port will be totally unusable for any purpose.

Navigation

[0] Message Index

[#] Next page