Answer call on pots line?

<< < (2/2)

Ostracus:
Quote from: RonR on October 25, 2011, 09:44:34 am

Quote from: Ostracus on October 25, 2011, 09:28:17 am

You can also click on the "enable" to turn on/off the port.


That's not true.

If he disables the LINE Port, he will not be able to "pickup on a phone call already in progress on another phone using the pots line" or  "dial **8 to dial out using that line".  The LINE Port will be totally unusable for any purpose.



I was referring to the "prevent incoming calls on the LINE Port from ringing the PHONE Port." part, not the earlier "barge in" part.

RonR:
Quote from: Ostracus on October 25, 2011, 02:56:12 pm

I was referring to the "prevent incoming calls on the LINE Port from ringing the PHONE Port." part, not the earlier "barge in" part.


Disabling the LINE Port will certainly prevent incoming calls on the LINE Port AND everything else having to do with the LINE Port.

Trick:
I was able to access the phone settings today. obitalk settings was already checked on the barge in mode, so i tried the defaut setting and then that didn't work but then i switched the setting 'outbound call route' under phone port back to obitalk setting. I was instructed to switch outbound call route because i was unable to dial an obitalk number such as **9 222 222 222. I was getting the message "there is no service available to complete your call."

so now barge in works when i press #, but now i cannot dial a **9 number, but I'm not using that as of now anyway, mostly google voice.

thanks for the help

Navigation

[0] Message Index

[*] Previous page