Unable to add device OBi 200
garyro:
After reading through the forum. I realized the best way to solve my problem was to put the piece of crap back in the box and return it to amazon. Just don't have the time to call the **$## ### hundreds of times.
Manisha:
I still can't add device trying since yesterday
3waller:
I have been trying for two weeks now with my OBI 202. Hundreds of attempts, no luck. This is crazy.
jonbo33:
Quote from: maruthi on December 23, 2020, 09:49:15 am
I am unable to add OBi 200 device. Echo test works fine. I performed factory reset.
After doing the above, I am unable to add device.
There is no phone number to call for help.
I was able to add my Obi200 after some simple settings changes, see post here https://community.linksys.com/t5/Wireless-Routers/FIXED-WRT32X-VOIP-Issues-with-Polycom-Obi200/td-p/1446269
tl;dr Obi200 admin: System Management / WAN Settings: DNSServer1 value 8.8.4.4 (google or whatever); WRT32X Advanced Settings, Local Network Settings - LAN Security: DMZ set to Obi200 IP address; and checked "Respond to WAN Pings" Can reset DMZ and Ping settings after added.
clong83:
Quote from: jonbo33 on February 21, 2021, 03:48:51 pm
I was able to add my Obi200 after some simple settings changes, see post here https://community.linksys.com/t5/Wireless-Routers/FIXED-WRT32X-VOIP-Issues-with-Polycom-Obi200/td-p/1446269
tl;dr Obi200 admin: System Management / WAN Settings: DNSServer1 value 8.8.4.4 (google or whatever); WRT32X Advanced Settings, Local Network Settings - LAN Security: DMZ set to Obi200 IP address; and checked "Respond to WAN Pings" Can reset DMZ and Ping settings after added.
After trying the **5 method a huge number of times and never having any succes, I did this and it worked, first try. Thank you!
I have a netgear router. I altered the WAN settings to have the DMZ server point to the ObiBox, and had it respond to pings. I already have my DNS servers set to 8.8.8.8 and 8.8.4.4 as default, so I am not sure if that is necessary or not.
Navigation
[0] Message Index
[#] Next page
[*] Previous page