911calls

<< < (2/2)

RonR:
Quote from: Needhelp on October 27, 2011, 08:08:23 pm

I'm just a bit lost with changing the outboundcallroute and digit map.thanks


1. Log into the OBi directly.

2. Set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method: Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method: Disabled

3. Set:

Physical Interfaces -> PHONE Port -> DigitMap:

([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli))

(Simply copy/paste the above value into the DigitMap field.)

4. Set:

Physical Interfaces -> PHONE Port -> OutboundCallRoute:

{([1-9]x?*(Mpli)):pp},{(<911:12341234567>):sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**9:>(Mpp)):pp},{(Mpli):pli}

where 12341234567 is the number you wish to be called when 911 is dialed.

(Simply copy/paste the above value into the DigitMap field.)

Remember to click on Submit at the bottom of each page before leaving that page.  When all changes have been made, click on Reboot in the upper right corner of the screen.

Initially set the number to be called to your cell phone or a friend for testing purposes.  Once you've confirmed that dialing 911 reaches that number, change it to the emergency number to wish to be called.

Navigation

[0] Message Index

[*] Previous page