OBi2182

OBi1022

Poly D230

OBi200

OBi202

OBi212

OBiWiFi5G
January 04, 2022, 09:14:32 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
« previous next »
  Print  
Author Topic: broadvoice on line 1 of 110  (Read 2497 times)
mycookiess
Newbie
*
Posts: 5
« on: October 24, 2011, 05:58:13 am »
Hi just got my obi110 and configured it with my broadvoice account on line 1.  i intend to put GV on line 2 later.  i am have problems with the 100 speed dial numbers that i have to enter #nn# to dial.  i get a fast busy immediately
please  help!
Logged
RonR
Hero Member
*****
Posts: 4527
« Reply #1 on: October 24, 2011, 09:06:19 am »
Assuming that you're talking about OBi Speed Dials...

Speed Dials are entered at one- or two-digits, optionally terminated by a # key.  You do not start a Speed Dial with a # key.
Logged
mycookiess
Newbie
*
Posts: 5
« Reply #2 on: October 25, 2011, 07:12:10 am »
no I am referring to broadvoices speed dial 100 that i enter with #nn#
Logged
RonR
Hero Member
*****
Posts: 4527
« Reply #3 on: October 25, 2011, 09:08:25 am »
Service Providers -> ITSP Profile A -> General -> DigitMap:

(#xx|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)

where aaa is your local area code.
Logged
mycookiess
Newbie
*
Posts: 5
« Reply #4 on: October 25, 2011, 10:29:08 am »
forgive me but this does not seem to allow me to dial #21# and dial in broadvoice my preset predial number
please help further
thanks
Logged
RonR
Hero Member
*****
Posts: 4527
« Reply #5 on: October 25, 2011, 10:35:20 am »
What happens when you dial #21#?

After doing so, look in the OBi's Call History and see what what actually sent to Broadvoice.
Logged
mycookiess
Newbie
*
Posts: 5
« Reply #6 on: October 25, 2011, 10:56:14 am »
fyi if you add in the place you suggested #xx# the broadvoice speed dial 100 works. i am trying now to convert my dial plan from linksys devices now to my new obi how do i enter the number for 311 etc the a preset number?
Logged
RonR
Hero Member
*****
Posts: 4527
« Reply #7 on: October 25, 2011, 11:00:59 am »
It was unclear from your description whether the trailing # needed to be sent to Broadvoice.  It's very unusual to send a leading or trailing #.

Quote from: mycookiess on October 25, 2011, 10:56:14 am
i am trying now to convert my dial plan from linksys devices now to my new obi how do i enter the number for 311 etc the a preset number?

Are you asking how to set up an OBi Speed Dial to dial 311?
Logged
mycookiess
Newbie
*
Posts: 5
« Reply #8 on: October 27, 2011, 02:29:20 pm »
yes i am concerning 311
blow is my dial plan which allows me with broadvoice to call my 10 preset numbers 100 speed dial numbers and the * features.  all seem to work properly so far

(1xxxxxxxxxx|#xx#|x#|*xx#|x#|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)

i use the # from my past with the sipura to tell the device the entry is finished.  must it be used with the obi as well?
Logged
RonR
Hero Member
*****
Posts: 4527
« Reply #9 on: October 27, 2011, 05:17:26 pm »
Quote from: mycookiess on October 27, 2011, 02:29:20 pm
i use the # from my past with the sipura to tell the device the entry is finished.  must it be used with the obi as well?

The trailing # that you enter to indicate you are done dialing does not belong in a DigitMap of either an OBi or a Linksys/Sipura ATA.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement