can't make international call in Auto Atendant

(1/1)

crazyToronto:
I can make international calls at home by dailing 01186xxx (for China). But in AA, press 2, then 01186xxx... # I hear nothing -- no busy tones or anything. Tried to press #, * or ramdomly but can't go back to main menus so just hang up and dial again.

I can call local numbers without problems from within AA like 416xxxxxxx.

Any suggestions? thanks

Richard

RonR:
Please post your PHONE Port DigitMap and OutboundCallRoute and your Auto Attendant DigitMap and OutboundCallRoute.

crazyToronto:
RonR, sorry for the late response.

I am not using PHONE PORT. SP1 is my primary. But I am posting the setting for PHONE port anyway.

PHONE Port:
DigiMap: ([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
OutboundCallRoute: {pli:(xx.)},{sp1:(<**1>xx.)},{sp2:(<**2>xx.)},{li:(<**8>xx.)},{pp:(<**9>xx.)}
Primary Line: SP1

SP1
DigiMap: (*98|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
I don't see OutboundCallRoute though.

AA:
DigiMap: ([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|<00:$1>|0|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))
OutboundCallRoute: {([1-9]x?*(Mpli)):pp},{0:ph},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Thanks,

RonR:
I suspect the problem with the Auto Attendant is that its PrimaryLine is not set to SP1 Service.

crazyToronto:
Hi, RonR.

I tried again and it works now. So all is good. thanks!

Navigation

[0] Message Index