Speed dial numbers using IP configuration gone everytime I save

(1/2) > >>

vskatusa:
Hi, I entered the speed dial and saved + rebooted the device but after couple of days when I go and see the configuration the speed dial numbers are not there! Obviously I am doing something wrong! Can somebody help me out

Dav3yDark0:
Are you using the local web interface or the OBiTalk web page to set your speed dials?

If you are using the local web interface, do you have "Auto Provisioning" disabled?

It is under System Management>Auto Provisioning>ITSP Provisioning
& System Management>Auto Provisioning>OBiTalk Provisioning

Dave

vskatusa:
Quote

Are you using the local web interface or the OBiTalk web page to set your speed dials?
Local web interface

Quote

It is under System Management>Auto Provisioning>ITSP Provisioning
& System Management>Auto Provisioning>OBiTalk Provisioning
Ok did it now

And rebooted using handset *** -> 9 -> 1 for confirm

That is it?

RonR:
You can reboot the OBi from inside the User Interface.  There's a Reboot button in the upper right corner.

If you have set:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

then changes you make locally should not be overwritten by the OBiTALK Web Portal.

vskatusa:
RonR, thx - I do see the reboot button at the right upper corner

Navigation

[0] Message Index

[#] Next page