Speed Dial Entry removal

(1/2) > >>

tkc9789:
I wanted to redo my speed dial.  How do I erase the existing entries?  Tried to overwrite the existing by entering the new values from the handset via *74+entry number+phone number. But *75 now announces "value is not available".  Thanks for any help.

QBZappy:
tkc9789,

It is easier and faster to do it from the Obi unit if you configure directly on the unit or the Portal if you mange the unit that way. Either way you get to see the entire list immediately making it easier to manage. Phone method is neat, none the less.

From the unit:
User Settings->Speed Dials

tkc9789:
OK.  I'll give that a try.  Thank you.

tkc9789:
The web portal did not work.  I had to turn off provisioning and do it from the phone directly connected to the OBi.  *76 removes the entries and *74 to input the entries.  Any idea why the web portal don't work?

RonR:
From page 17 of the OBi Device Administration Guide:

Speed Dialing of 99 OBi Endpoints or Numbers

The OBi device supports Speed Dialing of 99 numbers. These numbers can be associated with phones reachable via an Internet or landline service or the OBiTALK network. Be careful with the Speed Dial Set-Up as this will conflict with the Speed Dials set-up on the OBiTALK portal. The Speed Dials that are set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi.

Another great reason for disabling Auto Provisioning in the OBi.

Navigation

[0] Message Index

[#] Next page