Hook up POTS to Obi2182 via Obi212?
myobinameisinuse9987:
Thanks drgeoff.
Now that we're doing more things with the OBi's, have to do more complex configurations. Syntax documentation seems hard to find. Is there a "Master List" document for syntax, keywords, etc?
Four destinations? That works great for me.
For someone who has already forwarded a connection to another device, they would automatically know to add the 'pp' but for my first attempt, I didn't know. Thanks for confirming the solution.
drgeoff:
Quote from: myobinameisinuse9987 on April 21, 2021, 12:45:43 pm
Thanks drgeoff.
Now that we're doing more things with the OBi's, have to do more complex configurations. Syntax documentation seems hard to find. Is there a "Master List" document for syntax, keywords, etc?
Four destinations? That works great for me.
For someone who has already forwarded a connection to another device, they would automatically know to add the 'pp' but for my first attempt, I didn't know. Thanks for confirming the solution.
The Admin Guide available from the Docs section of obitalk.com has lots of info. There is also a good tutorial on Digit Maps and call routeing.
myobinameisinuse9987:
Quote from: drgeoff on April 21, 2021, 02:45:08 pm
The Admin Guide available from the Docs section of obitalk.com has lots of info. There is also a good tutorial on Digit Maps and call routeing.
[/quote]
Thank you.
Can you tell me (I've searched and searched and....)
Does OBi212 support 2-line phones into the line port OR out to a 2-line phone via the phone port?
Does OBi202 support out to a 2-line phone via the phone port(s), using a single 2-line wire (2-pair)?
Does OBi212 pass CallerID to other OBi devices, when using InboundCallRoute?
FYI. I called Poly last week to ask about features of 312 vs 212. They were spectacularly UN-knowledgeable. So we're it, guys. Help each other out.
Thanks.
drgeoff:
The OBi212 has no support for two line phones. The PHONE jack is wired for one phone. The LINE jack is wired for one POTS type line. Electrically the OBi212 has 1 FXS and 1 FXO port.
The OBi202 supports a two line phone. Connect a two line phone using a 4 conductor cord into the PHONE1 jack of the OBi202 or by using two 2 conductor cords - one into PHONE1 jack and one into PHONE2 jack. Electrically the OBi202 has 2 FXS ports.
Yes, the OBi212 passes CallerID to other OBis when using InboundCallRoute.
The OBi312 is identical to an OBi212 except that the 312 does not support Google Voice. (Ditto for the 302/202 and 300/200 pairs).
myobinameisinuse9987:
Thank you for the definitive answers ;)
I have another challenge, if you wish.
I'm using the InboundCallRoute now. In my plan, I have to change for 5 locations to ring on incoming 212, including the local ph port on the 212.
You said it was limited to 4.
It made me wonder if I can take one of the 1062 phones that rings from the 212 InboundCallRoute and somehow make it ring that 5th device? Daisy chain, if you will.
Yes, I know that if that device is offline, the chain will break. But I'm dealing with a hybrid of analog and VoIP, customer choice and 2yr landline contract.
I can easily do 5 ring locations from Anveo with any VoIP lines, but these analogs...
Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page