I don't use the OBiTALK Web Portal. If you wish to, you can find instructions here:
OBi Expert Configuration (Introduction)I find it much easier and quicker to configure the OBi by logging into it directly using the IP address returned by dialing ***1. The username/password is admin/admin unless it was changed on the OBiTALK Web Portal.
If you intend to make changes to the OBi directly, you must first disable Auto Provisioning or any changes you make will be overwritten by the settings on the OBiTALK Web Portal:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Remember to click submit at the botom of any page you have made changes to before leaving that page.
When all desired changes have been made, click Reboot in the upper right corner to make the changes effective.