News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

direct the call to Google Voice account on SP1 using SIP URI

Started by nssss, November 04, 2011, 11:26:20 PM

Previous topic - Next topic

nssss

I am using Google Voice (GV) service on SP1. And I'm trying to use the DID from IPKall instead of GV number on this SP1. What is the SIP URI I need to assign in the IPKall DID forwarding setup? I tried GV_number@obi100_public_IP:5060   And it didn't work. Is there any way to direct the call to SP1 using SIP URI?
If I get the this GV account on SP1 to be accessible using SIP URI, then I want to setup SP2 with another GV account. I appreciate your help.

RonR

In order to receive incoming calls via SIP URI, you must have at least one service (SP1 and/or SP2) configured as SIP.  It need not have an actual SIP provider operational on it, but by being configured as SIP, it cannot be used for Google Voice.

Your unused SP2 can be configured for SIP as follows:

Service Providers -> ITSP Profile B -> SIP -> ProxyServer : 127.0.0.1

Voice Services -> SP2 Service -> AuthUserName : (put anything here)
Voice Services -> SP2 Service -> X_RegisterEnable : (unchecked)
Voice Services -> SP2 Service -> X_ServProvProfile : B

SP2 status should show : Registration Not Required

You will also need to forward port 5061 to your OBi.

SIP URI's can then be addressed to : anything@obi100_public_IP:5061