Obi200 for GV and local within office calls
realjohny:
I have obi200 setup with Google voice and having obi phone adapter plugged into its USB port.
I want to use only one cordless (and not separate cordless for each purpose) plugged into obi200 for dialing both within US (and rest of the world) calling and for dialing within office extensions which all start with 02, 03, 04, 05, 06, 07, 08.
I have plugged in office line into obi phone adapter which is connected with USB port.
How can I achieve this, please help.
realjohny:
Thank you for your help.
In fact all extensions start with numbers I mentioned in my first post but these extnsions are usually four numbers. I think dial rules will be different then?
drgeoff:
Quote from: realjohny on April 24, 2021, 08:24:11 am
Thank you for your help.
In fact all extensions start with numbers I mentioned in my first post but these extnsions are usually four numbers. I think dial rules will be different then?
Assuming that the "obi phone adapter" is an OBiLINE and that your office phone system uses ordinary analogue phones ie not a digital PBX with digital phones.
Insert
{(0[2-8]xx):li},
at the very beginning of the Phone Port OutboundCallRoute and ensure that whatever SP GV uses is set as the Primary Line.
realjohny:
Thank you very much for the help.
I have set it up but getting a message from Google "Please try again".
After redoing it now I am getting the message "there is no call route"- from Obi.
drgeoff:
You did not read my post properly. "Insert" does not equal "Substitute".
Navigation
[0] Message Index
[#] Next page