[SOLVED] Ported from F9 to VOIP.MS outgoing OK - no incoming.
vtsnaab:
YAY !! Thanks Again Drgeoff !!!
Made that change.
I cannot verify success as yet because he is a 3rd shifter & is sleeping presently - hopefully we'll speak again before he heads out to work tonight.
I did find the desired info (I think ??) to clear its uses of the portal, as shown here:
https://wiki.voip.ms/w/index.php?title=File:Step1.png&filetimestamp=20140603165826
And it looks OK at his end.
Given that (I think...) the 100 is not supported via the portal anymore, is there any other setting I need to change to be 100% absolutely sure that it doesn't reach the portal anymore ??
Thanks also to Azrobert !!
I thought it looked like his f9 userid & had no idea why it was there - but also the checkbox had been empty & it is now checked.
Hopefully his calls will now ring in & that f9 is now all gone from his configuration.
It seems certain that f9 is either mostly or all gone from the VOIP world now.
When his service from there got super bad, I had a look over at DSLReports & found info indicating that Nitzan had abandoned the service & seems to be working for some company in CA these days.
Combined with the f9 site doing very strange things and the total lack of any support responses for a couple of months - it was really time for a change to a better ITSP.
Thanks Again Folks !!
drgeoff:
Despite the red messages there, the portal still supports the OBi100 and OBi110 just the same as it always did.
vtsnaab:
Okee dokee - thanks again !!
May I take for granted that with autoprovisioning shut off locally that the portal is now a non-concern for him ??
drgeoff:
Quote from: vtsnaab on May 04, 2021, 03:49:57 pm
Okee dokee - thanks again !!
May I take for granted that with autoprovisioning shut off locally that the portal is now a non-concern for him ??
If you mean "Obitalk Provisioning" set to "Disabled", yes.
Taoman:
Quote from: drgeoff on May 04, 2021, 03:43:10 pm
Despite the red messages there, the portal still supports the OBi100 and OBi110 just the same as it always did.
Hard to say if that's still true given the ongoing problems with adding a device to the dashboard. I've gotten reports that once you remove a 1xx series device from OBiTALK you can't add it back. When a user tried to confirm this with Poly tech support he received the following:
Quote from: Poly support
I did understand your previous email, to the letter, there is no misunderstanding there.
I have confirmed this information with our Senior Staff and have confirmed that the models OBi100 and OBi110 are no longer supported (for Google Voice or any other Service Providers) because they have been discontinued.
Kind regards
Clark
So it "appears" that if you have an OBi1xx series device already added to the OBiTALK web portal it will continue to function normally. But if you remove the device from the portal you can't add it back again. If true, this is a big deal for people with OBi1xx devices they manage remotely from the portal.
Navigation
[0] Message Index
[#] Next page
[*] Previous page