Telnyx and Obi2XX

<< < (2/4) > >>

azrobert:
Please post the following:
ITSP A and B DigitMaps
Phone Port DigitMap
Phone Port OutboundCallRoute

theancient:
Quote from: azrobert on October 03, 2021, 02:40:03 pm

Please post the following:
ITSP A and B DigitMaps
Phone Port DigitMap
Phone Port OutboundCallRoute


Thanks. I will get that info.  Since I don't know how to set, or the requirements for DigitMaps, that is a good possibility.

theancient:
Quote from: azrobert on October 03, 2021, 02:40:03 pm

Please post the following:
ITSP A and B DigitMaps
Phone Port DigitMap
Phone Port OutboundCallRoute


Is there someplace a novice can learn about how to set these up? I don't think I have ever touched them except for a Mango tutorial on ITSP A.


ITSP Profile A DIGITMAP
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|911|011xx.|xx.|*xx.|***xxx|4xxx|(Mipd) |[^*#]@@.)

ITSP Profile B  DIGITMAP
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)

Phone Port DIGITMAP
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|##|**70(Mli)|**8(Mbt)|**81(Mbt)|**82(Mbt2)|**1(Msp1)|**2(Msp2)|**3(Msp3)|**4(Msp4)|**9(Mpp)|(Mpli))

Phone Port OutboundCallRoute
{([1-9]x?*(Mpli)):pp},{(<##:>):li},{(<**70:>(Mli)):li},{(<**82:>(Mbt2)):bt2},{(<**81:>(Mbt)):bt},{(<**8:>(Mbt)):bt},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Msp3)):sp3},{(<**4:>(Msp4)):sp4},{(<**9:>(Mpp)):pp},{(Mpli):pli}

drgeoff:
Quote from: theancient on October 03, 2021, 04:22:27 pm

Is there someplace a novice can learn about how to set these up? I don't think I have ever touched them except for a Mango tutorial on ITSP A.



See the sticky post just above these non-stickies.

azrobert:
I don’t see the problem. Are you using OBiTalk to change the Primary Line? If not, change it again using OBiTalk and NOT the local interface using the OBixxx IP address.

Navigation

[0] Message Index

[#] Next page

[*] Previous page