December 02, 2021, 02:11:28 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: 1 ... 7 8 [9] 10 11
  Print  
Author Topic: token error  (Read 81081 times)
SteveInWA
Hero Member & Beta Tester
*****
Posts: 6433



« Reply #160 on: June 13, 2021, 08:20:13 pm »

Many thanks @SteveInWA!!

Still no service, but I'll continue to check it.

I assume this temporary fix should work for the issue "Connecting to 0.0.0.0" as well?


Somewhat OT, but for those that are getting status emails saying service is back--can someone please point me to the instructions to set those up?  I've never once received an Obi status email nor see where to configure them.

thx

Yes, "Connecting to 0.0.0.0 is another symptom of the same problem.

The emailed status notes are only sent to devices that are under warranty or on an extended service program AFAIK.  The settings are on the OBiTALK web portal's main page.
Logged

skier150
Newbie
*
Posts: 1


« Reply #161 on: June 13, 2021, 09:12:39 pm »

I have been down for 2 days.  Reading this thread since early on, and have tried every "solution" suggest.  Unfortunately none of them worked.  The last few posts in here mention that google is getting things back online.  I unplugged my OBI for about 20 minutes, and when I plugged it back in the status went to connected.  I hope this is a long term fix.  Located in NEPA.  Good luck!
Logged
Mickey613
Newbie
*
Posts: 4


« Reply #162 on: June 13, 2021, 09:20:52 pm »

I just got the ObiTalk email saying my device is registered i.e. working again.
This came just after trying incoming and outgoing calls and restarting Obi device. Not sure if that triggered it.
Also, status just changed to "connected".

Outgoing calls seem to work but still not incoming calls.
Update: Never mind that last part. Incoming calls are working too. I had set up GV calls to forward to a cell phone and another family member was using that connection so when I tried to call the home phone, it didn't ring. Doh. The GV line was busy.

« Last Edit: June 13, 2021, 09:26:41 pm by Mickey613 » Logged
TomForum
Newbie
*
Posts: 6


« Reply #163 on: June 13, 2021, 09:26:47 pm »

Quote
Yes, "Connecting to 0.0.0.0 is another symptom of the same problem.

The emailed status notes are only sent to devices that are under warranty or on an extended service program AFAIK.  The settings are on the OBiTALK web portal's main page.

Thanks much; you had suspected it was a symptom of the same problem before, just confirming the fix should work for this issue too.

I don't see any such option on the main page (dashboard), but I don't think mine are under warranty.  No worries.

Appreciate all of the support!!
Logged
SoNic67
Jr. Member
**
Posts: 20


« Reply #164 on: June 14, 2021, 02:32:55 am »

My OBi202 went back "Connected" overnight, without my intervention. S-E VA here.
Placed a call, all works.
Logged
garv
Newbie
*
Posts: 2


« Reply #165 on: June 14, 2021, 03:26:08 am »

As of this morning I am connected again.

Left it unplugged overnight since it wasn't doing anything anyway, and on repowering it this morning, success.

Glad I managed to find this thread when I did.
Logged
gsu13
Newbie
*
Posts: 3


« Reply #166 on: June 14, 2021, 04:32:14 am »

Unplugged and replug in - all three are working again.  They did not connect on their own overnight, but had to manually unplug.  One Obi200 and two Obi202s, all located in MD with some on Fios and one on Cox
Logged
derrickearly
Newbie
*
Posts: 10


« Reply #167 on: June 14, 2021, 06:21:30 am »

Many thanks to the folks who worked on this for us. My phone is back online.
Logged
ljneureu
Newbie
*
Posts: 9


« Reply #168 on: June 14, 2021, 06:37:38 am »

In Pennsylvania all my phones connected overnight without any intervention.
Logged
kes601
Newbie
*
Posts: 8


« Reply #169 on: June 14, 2021, 06:56:57 am »

Thanks to those who got this escalated and fixed quickly.  Mine came back online overnight in VA.
Logged
EricEastCoast
Newbie
*
Posts: 4


« Reply #170 on: June 14, 2021, 07:00:46 am »

Also back on line this Monday morning.  Checked Google Voice Settings, and my OBi200 is again listed.
Logged
MapGuy
Newbie
*
Posts: 5


« Reply #171 on: June 14, 2021, 08:34:08 am »

Thanks again to whoever addressed the problem.  Power cycling my Obi this morning did the trick. 

Maryland suburb of Washington DC on FIOS.

Mapguy.
Logged
TheWalkman
Newbie
*
Posts: 6


« Reply #172 on: June 14, 2021, 08:52:19 am »

As of 11:50 EST (2021.6.14) (Virginia) I'm up an running with no intervention on my part!

Thanks to folks behind the scene.
« Last Edit: June 14, 2021, 08:54:21 am by TheWalkman » Logged
bitstopjoe
Jr. Member
**
Posts: 66


« Reply #173 on: June 14, 2021, 12:01:23 pm »

 Ditto and Amen!!
Logged
chiptape
Newbie
*
Posts: 9


« Reply #174 on: June 14, 2021, 12:54:24 pm »


Somewhat OT, but for those that are getting status emails saying service is back--can someone please point me to the instructions to set those up?  I've never once received an Obi status email nor see where to configure them.


The emailed status notes are only sent to devices that are under warranty or on an extended service program AFAIK.  The settings are on the OBiTALK web portal's main page.

Mine is at:

1... https://www.obitalk.com/obinet/pg/obhdev
2... Click on your device name... Middle pane, top.
3... "Enable OBi Notify"... Check box to the right of "Enable OBi Notify".
4... "Save"... Under "Enable Obi Notify".

It says, "OBiTALK Premium Support required to use this feature".
But I'm not a paid OBiTALK subscriber or under warranty, and I get email notifications.
Sometimes they go to my Yahoo spam.
Logged
awriter
Jr. Member
**
Posts: 34


« Reply #175 on: June 14, 2021, 02:55:47 pm »


The emailed status notes are only sent to devices that are under warranty or on an extended service program AFAIK.  The settings are on the OBiTALK web portal's main page.

Mine is at:

1... https://www.obitalk.com/obinet/pg/obhdev
2... Click on your device name... Middle pane, top.
3... "Enable OBi Notify"... Check box to the right of "Enable OBi Notify".
4... "Save"... Under "Enable Obi Notify".

It says, "OBiTALK Premium Support required to use this feature".
But I'm not a paid OBiTALK subscriber or under warranty, and I get email notifications.
Sometimes they go to my Yahoo spam.
[/quote]

When I try to check Enable Obi Notify - a popup box says I need to buy a year of Premium support for $10 from Amazon. Won't ley me check the box without that.
Logged
TomForum
Newbie
*
Posts: 6


« Reply #176 on: June 14, 2021, 04:08:23 pm »

Many thanks again SteveInWA!!  (and anyone else behind the scenes)

Mine was back up by morning.

Thanks @chiptape for the breadcrumbs.  I found it.  One is now enabled that's still in warranty.
Logged
Moonwalker
Jr. Member
**
Posts: 36



« Reply #177 on: June 15, 2021, 10:27:12 am »

Still a little weirdness happening?

I just started getting the no response from service provider again on all calls, but the dashboard said connected. I trashed the settings and signed in again and this seemed to fix it for now. Is this issue still a work in progress?
Logged
BigJim_McD
Full Member
***
Posts: 203



« Reply #178 on: June 15, 2021, 10:46:07 am »

The issue has returned this morning on our Google Voice numbers that connect to OBi202 and Obi200's via VoIP.ms.   Calls ring only one time, the caller gets a voice recording with an error message.

Yesterday, all calls were connecting correctly.

*Update*:  'Issue Cleared' after I disabled routing to NoMoRobo.

Checking 'Call History' on my OBi200, I noticed that all calls routed to
NoMoRobo for SPAM filtering were connecting.

To SP4(*18667326184@sipbroker.com)      Call Connected

I disabled routing to: 'NoMoRobo' and my test calls to our Google Voice numbers are working correctly now, 'Forwarding' to our VoIP.ms DID 3's, ringing phones on our two OBi202's and the OBi200.  I'm able to answer, connect and talk on each one.

Yesterday routing to NoMoRobo was working correctly and did NOT connect on regular calls.

« Last Edit: June 15, 2021, 11:47:29 am by BigJim_McD » Logged

BigJimMcD
Taoman
Hero Member
*****
Posts: 1483



« Reply #179 on: June 15, 2021, 11:00:57 am »

and Obi200's via VoIP.ms.   Calls ring only one time, the caller gets a voice recording with an error message.

Just to clarify........ Are you saying that inbound calls to your GV number that then get forwarded to Voip.ms are not working properly? Even though it's being forwarded it still only rings one time and the caller gets the error message?
Logged
Pages: 1 ... 7 8 [9] 10 11
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement