token error
awriter:
No offense taken, Steve. I'll continue troubleshooting elsewhere. Turns out the phone IS ringing - in the background somewhere - but if it's a GV call, there's no interface to *answer* it! Works fine with calls straight to the phone. If it wasn't maddening, it would be funny. :)
bartleby:
Since Monday June 14, I've been able to place GV calls with my Obihai 200. Have had the three green lights too. However, my Obihai doesn't ring on incoming calls (so I've been answering them on my Android phone.) That had been working just before the whole token error problem started. I logged into my GV account, and it is still set to ring. Any ideas what might be going on here?
MSRobi:
Quote from: bartleby on June 18, 2021, 01:34:24 am
I logged into my GV account, and it is still set to ring. Any ideas what might be going on here?
This is a long shot, but get back into your GV account. Click on the 3-horizontal bar in upper left, and then click on "Legacy Google Voice". Click on "Phones" tab. One of the entries under "Forward calls to:" should start with "sip:", which is your Obi device. If it isn't checked, check it and that should solve your problem. If it is already checked, then I didn't help you.
PeterFales:
After nearly a week, it never fixed itself. But for the record, what worked for us was to go to the SP1 configuration page and click the link near the bottom that said "Replace Google Account Credentials." As soon as that update was sent to the phone, the status changed from "Registration not required" to "Connected."
MSRobi:
The other shoe has just dropped:
https://support.google.com/voice/thread/114914789/important-information-for-poly-obitalk-consumer-device-use-with-google-voice
I don't blame Google for wanting to move forward with OAuth, they've been moving to it for a few years now.
Basically Google is telling Poly it is time to "sh*t or get off the pot" and update your firmware to the new Certificate. I take hope in this one sentence: "Poly is working on a new firmware release."
If Poly does release the new firmware, this obitalk forum will have plenty of notice and places to get it. However, if Poly is not interested in the consumer Poly devices, we'll see the rest of the approved GVoice poly devices become unsupported and unapproved for Google Voice (like Obi100).
Navigation
[0] Message Index
[#] Next page
[*] Previous page