Obi 202 and GV: Token error; "Registration not required", can't re-register GV
paul1149:
A few days a go Obi 202 stopped working. Attempts to call out bring a 'did not receive a response from provider' voice error. I thought the notices were due to power outages, but no, it's the unit.
I have a "token error". I tried to re-register with GV; then it said "registration not needed", and still wouldn't work.
I rebooted obi, router, and modem. Now I don't get the voice error, `did not receive a response from provider`, but there is no attempt at ringing the phone. And now the ObiTalk errors says: 'Connecting to 0.0.0.0;Token Error'. At least before it had a realistic-looking IP address.
Not looking good here. Any help would be greatly appreciated.
drgeoff:
There are dozens of posts in several threads about this. No need to start another one.
paul1149:
I tried the only remedy I found here, which I documented above, to no avail. Not sure what else I could do.
paul1149:
Found a solution from a nearby thread; working thus far:
https://www.reddit.com/r/Googlevoice/comments/nxubgn/google_voice_token_error_message_on_poly_obitalk/h1jc58j/
SteveInWA:
Quote from: paul1149 on June 13, 2021, 06:56:55 am
Found a solution from a nearby thread; working thus far:
https://www.reddit.com/r/Googlevoice/comments/nxubgn/google_voice_token_error_message_on_poly_obitalk/h1jc58j/
If I could post a gigantic BULLSHIT next to that guy's "solution" I would. It's tiresome explaining WHY it's bullshit, but while harmless, it won't solve the problem, which can't be solved by any user settings.
Navigation
[0] Message Index
[#] Next page