Quote from: glasgow on August 25, 2021, 08:24:31 AM
If I understand correctly, the OutboundCallRoute changes is to route sp2 to tg1, so is the DigitMap.
I don't understand what you're saying.
Before my fix you had:
PrimaryLine set to TG1 and {(Mpli):pli}
Mpli points to the primary line DigitMap, ((Msp2)|(Msp1))
pli points to the primary line, TG1
If the dialed number matches a rule in sp2 or sp1 digitmap, the call is routed to tg1.
The bug appears when the primary line is set to TG1.
The circumvention is to set the primary line to sp2.
And to route the call to the trunk group: {(Msp2):tg1}
If the dialed number matches a rule in the sp2 digitmap, the call is routed to tg1.
The TG1 Digitmap is no longer used.