October 22, 2021, 11:36:46 am *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: InboundCallRoute and DigiMap question  (Read 1655 times)
glasgow
Newbie
*
Posts: 19


« on: September 04, 2021, 04:45:02 pm »

Hello,

What I want to implement is simple: my GV is SP2, I want to block all incoming calls except some that I defined in a digimap. I defined digimap "blk" to be (@@.), "acc" to be (15181234567|5181234567), X_InboundCallRoute for SP2 to be {(Macc):ph},{(Mblk):},{ph}. But when I make calls from 5181234567 to my GV#, my phone still doesn't ring. After I remove {(Mblk):} part it rings, just like from any other numbers. Based on my research, rules are tested from left to right and the first fits wins.

Did I do anything wrong? Thanks in advance!
Logged
azrobert
Hero Member & Beta Tester
*****
Posts: 4168


« Reply #1 on: September 04, 2021, 05:36:48 pm »

GV sends 11 digits with a “+” prefix.

acc DigitMap: (+15181234567)
SP2 X_InboundCallRoute: {(Macc):ph}

You don’t need blk.
Logged
glasgow
Newbie
*
Posts: 19


« Reply #2 on: September 04, 2021, 05:45:36 pm »

GV sends 11 digits with a “+” prefix.

acc DigitMap: (+15181234567)
SP2 X_InboundCallRoute: {(Macc):ph}

You don’t need blk.


Yes now it works as expected! Thank you!  Grin
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC

Advertisement
Advertisement