How to call home ??

(1/2) > >>

s2knaf@gmail.com:
I have a google voice # and a 110 device.  I can make and receive calls no problems.
My google voice # rings the home and my mobile simultaneously.

When I try to call my google voice # from my mobile I get the obi attendant.

Is there a way I can ring the home phone from my mobile ?

I would like to keep the ring my mobile on from Google voice.

I also added my mobile to the circle of trust  (is this my mistake ?)

  ~Knaf

RonR:
Look for a rule similar to the following and remove it:

Voice Services -> SP1 Service -> X_InboundCallRoute : {12341234567:aa}

where 12341234567 is your cell phone number.

s2knaf@gmail.com:
Had to remove my mobile from circle of friend first.
I then was able to delete the rule.
Rebooted, Replugged in, still not working.

Any other ideas ?

  ~Knaf

Quote from: RonR on November 10, 2011, 03:47:22 pm

Look for a rule similar to the following and remove it:
Voice Services -> SP1 Service -> X_InboundCallRoute : {12341234567:aa}

RonR:
Quote from: s2knaf@gmail.com on November 11, 2011, 05:59:30 pm

Had to remove my mobile from circle of friend first.
I then was able to delete the rule.
Rebooted, Replugged in, still not working.

Any other ideas ?


Look in the OBi itelsef (not through the OBiTALK Web Portal).  The ONLY way a call gets to the Auto Attendant is through an {...:aa} InboundCallRoute rule.

If you're configuring the OBi directly instead of through the OBiTALK Web Portal, did you set?:

System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

s2knaf@gmail.com:
Hi Ron,

Thank you for the quick response !

I just additionally changed the 2 settings you mentioned, rebooted, but still no success.
I also verified the Inbound call is set to the default "ph" only now.

   ~Knaf

Navigation

[0] Message Index

[#] Next page