Cannot add device...
Thursday:
Hello,
I'm trying to add an Obi110 device, but I'm having difficulty... the Obi is on my network (I can see it obtained the address 192.168.1.101), and I hear a dialtone when I pick up the phone to which its connected. I was able to update the Obi by dialing ***6.
When I start the "Add Device" process (on the web), it gives me a **5xxxx number to dial. I dial that number, and I hear the thing say "The number you have dialed, **5xxxx, has been sent to the server" (and it reads the correct number). But the timer just keeps ticking down to zero.
Any ideas? Do I need to have any port forwarding enabled on my router? I feel like I'm missing something...
Mercury:
I have the exact same issue. The device grabbed an IP address and I dial out the code and I heart the automated message but the device is never added.
RonR:
It's easier and faster to configure the OBi without using the OBiTALK Web Portal.
Simply log into the OBi at the IP address returned by dialing ***1 using admin/admin.
Then set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Google Voice on SP1:
Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
Thursday:
Awesome, thanks. I found I also needed to set these two to get the voice mail indicator to light up on my phone...
Voice Services -> SP1 Service -> MWIEnable : (checked)
Voice Services -> SP1 Service -> X_VMWIEnable : (checked)
akxxxxxx:
Hi,
I have the same problem where i cannot add the obi 110 device.
I tried logging in to the device, but cannot find those parameters (ITSP and OBiTALK Provisioning) in order to disable them.
Why can't I find those parameters?
Thx
Ak
Navigation
[0] Message Index
[#] Next page