Digitmap Help

(1/5) > >>

Thunnderman:
I want to block/prevent some of the IDD access code from the LINE port and looking for help on how to compose the Digitmap in Line port such as

Case 1

1. block all number start from 001+any number

AND

2. block all number start from 0080+any number

Case 2

1. replace '001' + any number to '0088' + any number

AND

2. replace '0080' + any number to '0088' + any number

Thanks in advance...

RonR:
Physical Interfaces -> LINE Port -> DigitMap : (<001:0088>xx.|<0080:0088>xx.|xx.)

Thunnderman:
Thanks RonR. However, I figured out the call history still shown the original number (001... or 0080) instead of (0088... or 0088...)?

On the other hand, what should be the Digitmap if I just want to block both only?

Thanks.

RonR:
Dialed numbers destined for the LINE Port beginning with 001 or 0080 should have those digits replaced by 0088.

I just tested it here and it works as advertised.

Thunnderman:
RonR, you are right and it works if I dialed the number physically by the phone attached to that obi unit or call into that obi unit thru AA > press '2' > dialed the 001 or 0080 numbers, the call history shown a replaced 0088 numbers.

However, if I dialed 001 or 0080 thru another obi unit by using speed dial likes 2*001... or 2*0080..., no replacement of 0088 done as call history shown exactly the original number.

Any idea?

Navigation

[0] Message Index

[#] Next page