OBi202 keeps losing SIP registration with Anveo

<< < (4/4)

Shplad:
I ended up putting Anveo in slot 3.  I swapped the softclient to be the subaccount now,
instead of the other way around.

For the OBi, it seems to be working (for now.)
For the softclient, it appears to be registering SIP, but I can't make calls. I just get a
busy signal every time. Any idea why that happens?

One strange thing that happened is that after I put Anveo into slot 3 and configured
my Softclient to use the subaccount, The Obitalk dashboard showed my unit as
offline for about half an hour, with an error message saying this would've occurred
because I'd factory reset my OBi or wiped the setttings. I had done neither.

Is SIP registration data included in an OBi syslog? Maybe I'll keep any eye on
the OBi that way from time to time.

Shplad:
EDIT: SIP Registration is mostly stable. It occasionally loses registration, but I'll take whatever win I can get.

Thanks.



AAAAND....I've lost registration again. I don't get it. It's almost as if I have to use the phone constantly to keep the Obi registered. I'm out of ideas.

Navigation

[0] Message Index

[*] Previous page