Cannot configure new service provider via Obitalk portal

[txobi]

Recently on the Obitalk portal website, when I tried to click on Service Provider 1 in the Configure Voice Services, it did not open up the configuring page.  I got an "Error on page" status on my Internet Explorer and I stuck at the Device Configuration - Home.  I used IE 7.  Did anybody experience the same with the website?

Thanks,

[RonR]

It's only a couple of settings to configure the OBi directly without using the OBiTALK Web Portal.  Here's an example of using Google Voice on SP1 and a VoIP provider on SP2:


System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled

Google Voice on SP1:

Service Providers -> ITSP Profile A -> General -> Name : Google Voice
Service Providers -> ITSP Profile A -> General -> SignalingProtocol : Google Voice
Voice Services -> SP1 Service -> AuthUserName : (Google Voice username)
Voice Services -> SP1 Service -> AuthPassword : (Google Voice password)
Voice Services -> SP1 Service -> X_SkipCallScreening : (checked)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service

VoIP on SP2:

Service Providers -> ITSP Profile B -> General -> Name : (provider name)
Service Providers -> ITSP Profile B -> SIP -> ProxyServer : (proxy server)
Voice Services -> SP2 Service -> X_ServProvProfile : B
Voice Services -> SP2 Service -> AuthUserName : (sip username)
Voice Services -> SP2 Service -> AuthPassword : (sip password)
Voice Services -> SP2 Service -> CallerIDName : (callerid name)