GV supports 2 call sessions after firmware update??
xray:
I am so excited saw that the new firmware update (1892) added "Each Google Voice service supports 2 call sessions".
I updated and tried it but not working for me. Anyone get 2 call sessions working with 1 GV service?
And how to set it up?
Here is what I did:
setup: sp1- GV (primary line), sp2- other sip service.
testing procedure:
1. Using cell phone1 call into AA and dial out using sp1(GV) to cell phone2 (got connected) .
2. then pickup home phone call cell phone 3. And get a greeting no service available something like that.
Thanks.
OBi-Guru:
Your scenario #1 is already consuming 2 GV call sessions. Call from cell1 is 1st session, and Call to cell2 is the 2nd.
Typical use case: you are on the OBi phone calling out using GV, press flash (hook-flash) to get a 2nd dial tone, and make a new GV call. Press flash again, you can conference the 2 calls together.
MichiganTelephone:
If anyone is using an OBi device as a gateway between Asterisk/FreePBX and Google Voice I can confirm that I was able to have two simultaneous calls come in on the same Google Voice account (using SP1 only) and both were routed as expected by Asterisk. So I am very happy with the fixes in this firmware release and think that many OBi users will be also. ;D ;D ;D
xray:
Sorry My mistake. Just realized this as Obi-Guru states.
Thanks.
azrobert:
XRAY did not give us enough info. If in scenario #1 he called in on SP1-GV to the AA then called out on SP1-GV that would be two sessions, but if he called in on SP2 to the AA then called out on SP1-GV then it would only be one session.
Am I confused or do I have it right?
Navigation
[0] Message Index
[#] Next page