S0 NOT WORKING? 1.3.0 Build:2586
mrjoe:
I'm using the following Dial Plan:
DigitMap: ([0-9]x?*(Mpli)|**0|*xx.|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli)|(<009722>[2-9]xxxxxxS0)|(<0:00972>[2-9]xxxxxxxS0)|(<0:00972>7xxxxxxxxS0)|(05xxxxxxxxS0)|(0044xxxxxxxxxxS0)|(1xxxxxxxxxS0)|00x
OutboundCallRoute: {([0-9]x?*(Mpli)):pp},{(<#:>|[1xx]):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<0044:0>(8x.)):sp1},{(<**2:>(Msp2)):sp2},{(<00:>(1xxxxxxxxxxS0)):sp2},{(<**8:>(Mli)):li},{(<:#>(*xxxxS0)):li},{(<:**>(00X.)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I dialed a 1800 number normaly and timed it,
I then dialed with a # at the end and timed it too.
Dialling without a # still too a full 10 Seconds longer than using a #.
Is it me or is S0 not working?
Please could someone in the know please tell me if there are any faults in my dial plan.
I have Voipfone UK as SP1 Google Voice as SP2 a Freetalk® Connect me Skype device plugged in to the Line port and plugged in to the Skyoe adapter is an Israeli POTS line which uses Voip.
Thanks in advance
RonR:
1. Sn is not valid in OutboundCallRoute rules.
2. It's generally a bad idea to modify and put all kinds of special rules in the PHONE Port DigitMap and OutboundCallRoute. It's preferable to keep this kind of stuff at the appropriate trunk DigitMap level.
3. You currently have a lot of rules that make no sense to me.
If you describe the exact dialing scenario you're trying to support, I'll try to help you generate the necessary DigitMap's.
mrjoe:
Thanks for agreeing to help me out.
I am trying to dial all calls besides for 1xxxxxxxxx and 05xxxxxxxx
calls out through skype and am forcing that with the Skype box's **
Code.
In Israel Local Numbers are 7 Digits and Area Codes are 2 Digits so I
have made it that if I call a 7 digit it should add 972 which is the
international code and 2 which is the area code when dialing from
abroad as you drop the 0
if I dial a 9 digit it just puts 972 before and removes the 0. There
are some 8 digit national numbers that I have appled similar rules to.
I'm also trying to make all 0800 UK numbers go through Voipfone and US
numbers go through Google Voice.
mrjoe:
Forgot to say that in Israel 1800 numbers have 10 digits and Cells which I would like to use my PSTN for start with 05 and are also 10 digits.
I just realise that I forgot to out a | somewhere and it seems S0 is now working.
Sorry about that.
Maybe you can help me with this too?
I have to pray every time I reboot that it should reconnect afterwards as on friday it kept refusing to connect and.I.had to Reset multiple times.
RonR:
It's best to stay away from *, **, and *** prefixes since the OBi already has dedicated uses for them. Please list in great detail all the destination patterns you wish to go through each trunk and any transformations that need to be accomplished along the way. I can only be of assistance if I know everything that needs to be supported.
Navigation
[0] Message Index
[#] Next page