Quote from: Dr_CRX on August 30, 2022, 10:56:13 PMthe problem is from the 5GHz WiFi AP you have.
Please re-read the intial post.
Quote from: Maygill on January 21, 2022, 02:36:21 PMAfter updating firmware to 6.2.3 (Build: 5330.1311), OBi2182 5Ghz no longer works.
OBiWiFi Setup mode no longer broadcasts. Other devices do not see the SSID.
OBiWifi setup mode 5GHz SSID (from OBi2182) broadcasts fine with 6.2.3 (Build: 4907.1311).
However, it doesn't with 6.2.3 (Build: 5330.1311), which was the firmware version tested, even after OBi2182 (Hardware version is 1.0) is reset.
Quote from: Dr_CRX on August 30, 2022, 10:56:13 PMbecause the 80MHz is for AC only which is not supported by this phone
802.11ac is an advertised spec, regardless of whether 80Mhz is supported, but that doesn't have any bearing on this issue.
https://www.poly.com/content/dam/www/products/phones/obi/obi2182/doc/obi2182-ds-en.pdf"Key benefits
• Built-in 2.4 GHz and 5 GHz,
802.11ac WiFi and Bluetooth 4.0 compatibility to expand connectivity options."
I have smartphones, PCs, smart devices (smart tv also couldn't find OBi2182's OBiWifi setup SSID nor connect to it when manually entered), routers, etc. None of them populate the 5GHz OBiWifi Setup SSID from the 2182 when using 6.2.3 (Build: 5330.1311) firmware for the OBi2182. All of them show the 5GHz OBiWifi Setup SSID when using 6.2.3 (Build: 4907.1311). All devices are not using the same Wi-Fi chipset.
I don't have access to 2182s to test currently, but this problem has nothing to do with access points or trying to connect or provide OBi2182 WAN access via 80MHz channels.