how do I route international traffic from sp2?
home-with-gv:
I have sp1 configured with google voice and SP2 to with SIP account. I want to route my outbound international traffic from SP2 with out dialing **2 in the front. I want to have all the numbers prefixed with 011 shold go through SP2. Can somebody tell me how to do that? I really appreciate your response.
RonR:
Service Providers -> ITSPA Profile A -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|<**2>011xx.|(Mipd)|[^*]@@.'@'@@.)
Service Providers -> ITSPA Profile B -> General -> DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
Physical Interfaces -> PHONE Port -> PrimaryLine : SP1 Service
where aaa is you local area code.
home-with-gv:
Thanks a lot Ron for your quick response. It worked for one call but the device keeps on rebooting and going to default settings. And I am not able to see my changes. All I can see is default digitmap in both profiles. I was rebooting the device after the changes I made. that time I can see my changes. But some how the device reboots by itself and goes to defaults. can you guess what is going on here?
RonR:
If you're configuring the OBi directly, also set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
home-with-gv:
yeap. I am configuring on Obi directly. it worked with the suggested changes.
Thanks a lot for quick and prompt response.
Navigation
[0] Message Index
[#] Next page