Star code variables

<< < (2/2)

RevKev:
Thanks RonR. SP1 isn't my primary line. I have it set to trunk group 1 which is li,sp1,sp2. But if not that it would be line as primary is my home phone. sp1 is my office so for work, I normally dial #1... (I've set #1 to do the same thing as **1). In this case, I'm trying to force the number out on sp1 so I don't have to dial #1*1212.

I tried putting the digitmap on trunk group1 but that didn't work - gives me a busy signal.

RonR:
If you've changed things to use #1, #2, #8, and #9, then using **1 in a DigitMap isn't going to be valid.

RonR:
I also have TG1 as my PrimaryLine and setting:

Trunk Group1 -> DigitMap : (<*12:180055512>xx|...)

works as expected : *1212 calls 18005551212

You've got something amuck there as several things you've said don't work should have.

RevKev:
Yep, something amuck. I didn't have the enclosing parenthesis. Works perfectly now - and much cleaner than using phone:digitmap. Thanks!

Also, I left the **1, etc. in the digitmap as well as the #1 so both work.

Navigation

[0] Message Index

[*] Previous page