Dialing prefix #0 for selecting 2nd PSTN line

<< < (4/5) > >>

RonR:
marcb,

The following should make calling from your OBiON App work properly.


Voice Services -> OBiTALK Service -> InboundCallRoute:

{(Mcot)>(<#0,,,,,>04xxxxxxxx):li},{(Mcot)>(Mpli):pli},{(Mcot)>(<*1:>(Msp1)):sp1},
{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*8:>(<#0,,,,,>04xxxxxxxx)):li},{(Mcot)>(<*8:>(Mli)):li},
{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},
{(Mcot)>(<**8:>(<#0,,,,,>04xxxxxxxx)):li},{(Mcot)>(<**8:>(Mli)):li},
{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}

Replace pli above (2 places) with the desired PrimaryLine for your OBiON App (sp1, sp2, li, or pp).


User Settings -> User Defined Digit Maps -> User Defined Digit MapX
Label : cot
DigitMap : (290123456)

where 290123456 is your OBiON App OBiTALK number.


Calls from your OBiON App will go out the designated OBiON App PrimaryLine by default, but **1, **2, **8, and **9 may be used to select an alternate trunk.  04xxxxxxxx calls will go out the LINE Port by default as well as in conjunction with **8, with #0 followed by a 1 second delay prepended.

marcb:
Quote from: RonR on December 20, 2011, 01:08:00 pm


Quote from: marcb on December 20, 2011, 12:53:32 pm

Ideally I would still have to add *31* in front of the 04 number and  # at the end in order to mask the originating number, because I do not want people to call that number.


I don't know what you're referring to here.



When I want to make an anonymous call (the phone number of the fixed line used to make the call will not appear on the other person's handset) I need to dial *31*04xxxxxxxx# (prefix *31* - suffix #) 04xxxxxxxx being a cell phone number.

RonR:
Try this for the *31*04xxxxxxxx# cases in additon to 04xxxxxxxx:



Physical Interfaces -> LINE Port -> DigitMap : (<+>(04xxxxxxxx|*31*04xxxxxxxx#)|...)

Physical Interfaces -> PHONE Port -> OutboundCall Route:

...,{(<#:>|<+:#0,,,,,>(04xxxxxxxx|*31*04xxxxxxxx#)|911):li},...

Voice Services -> OBiTALK Service -> InboundCallRoute:

{(Mcot)>(<#0,,,,,>(04xxxxxxxx|*31*04xxxxxxxx#)):li},{(Mcot)>(Mpli):pli},{(Mcot)>(<*1:>(Msp1)):sp1},
{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*8:>(<#0,,,,,>(04xxxxxxxx|*31*04xxxxxxxx#))):li},
{(Mcot)>(<*8:>(Mli)):li},{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},
{(Mcot)>(<**2:>(Msp2)):sp2},{(Mcot)>(<**8:>(<#0,,,,,>(04xxxxxxxx|*31*04xxxxxxxx#))):li},
{(Mcot)>(<**8:>(Mli)):li},{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}

Replace pli above (2 places) with the desired PrimaryLine for your OBiON App (sp1, sp2, li, or pp).

User Settings -> User Defined Digit Maps -> User Defined Digit MapX
Label : cot
DigitMap : (290123456)

where 290123456 is your OBiON App OBiTALK number.

I don't have any experience with how OBiON App's handle dialing #, so the *31*04xxxxxxxx# calls may not work from there (there's no DigitMap or other configuration option in an OBiON App).

marcb:
Quote from: RonR on December 20, 2011, 02:12:22 pm

marcb,

The following should make calling from your OBiON App work properly.


Voice Services -> OBiTALK Service -> InboundCallRoute:

{(Mcot)>(<#0,,,,,>04xxxxxxxx):li},{(Mcot)>(Mpli):pli},{(Mcot)>(<*1:>(Msp1)):sp1},
{(Mcot)>(<*2:>(Msp2)):sp2},{(Mcot)>(<*8:>(<#0,,,,,>04xxxxxxxx)):li},{(Mcot)>(<*8:>(Mli)):li},
{(Mcot)>(<*9:>(Mpp)):pp},{(Mcot)>(<**1:>(Msp1)):sp1},{(Mcot)>(<**2:>(Msp2)):sp2},
{(Mcot)>(<**8:>(<#0,,,,,>04xxxxxxxx)):li},{(Mcot)>(<**8:>(Mli)):li},
{(Mcot)>(<**9:>(Mpp)):pp},{(Mcot):aa},{ph}

Replace pli above (2 places) with the desired PrimaryLine for your OBiON App (sp1, sp2, li, or pp).

I've replaced pli with li meaning the fixed line which I want to use in this case.

User Settings -> User Defined Digit Maps -> User Defined Digit MapX : (290123456)

where 290123456 is your OBiON App OBiTALK number.

This is not really clear to me. I have added my Obion App OBITALK number between brackets in the User Defined Digit Map2 -> DigitMap and added Marc's Iphone as Label.

When I call a 04xxxxxxxx number from OBITALK, it simply rings my Obi110 phone. I guess I must have missed something.

Calls from your OBiON App will go out the designated OBiON App PrimaryLine by default, but **1, **2, **8, and **9 may be used to select an alternate trunk.  04xxxxxxxx calls will go out the LINE Port by default as well as in conjunction with **8, with #0 followed by a 1 second delay prepended.

RonR:
Quote from: marcb on December 21, 2011, 10:45:06 am

When I call a 04xxxxxxxx number from OBITALK, it simply rings my Obi110 phone. I guess I must have missed something


I corrected the problem in Reply 17 (I forgot to list the Label):

User Settings -> User Defined Digit Maps -> User Defined Digit MapX
Label : cot
DigitMap : (290123456)

Navigation

[0] Message Index

[#] Next page

[*] Previous page