Unable to call +3531 since upgrade

[Gavo]

Hello,

Since my last firmware upgrade I cannot dial any number prefixed 003531. According to my dial plan (below) as it cannot match the prefix it should route over my default pstn line (where calls to 00353 1 to 7 are free). Logging at my call log it tries to route the call over SP2 where all I get is one ring and then silence.


(<0:**20044>7xx.| <**1>0844xx.| <00:**2>1xx.|  <**2>00[2-9]xx.|!09xx.|xxxxxxxS4|<**2>003538xx.|  xx.)


Any ideas ?


Regards

Gavin

[RonR]

(<0:**20044>7xx.| <**1>0844xx.| <00:**2>1xx.|  <**2>00[2-9]xx.|!09xx.|xxxxxxxS4|<**2>003538xx.|  xx.)

Which DigitMap is this?  What is your PrimaryLine?  An OBi dial plan is made up of a several DigitMaps, an OutboundCallRoute, and a PrimaryLine.  You only posted a fragment of the whole picture.

(...|<**2>00[2-9]xx.|....)

It appears this rule would catch 00351 numbers and send them to SP2, but without knowing what the SP2 DigitMap is, it's impossible to tell what might happen to them there.

[Gavo]

Ron,

The digit map shown in my line digit map. My primary line is my PSTN. Your questions actually led me to a fix.
After the firmware upgrade the SP2 digit map was set at device default rather than Obitalk settings. I've now corrected this and all is working fine.


Cheers

Gavin