Asterisk setup with OBi110
justin:
Is there anyone who can help me setup my asterisk with OBi110?
I have tried using:http://michigantelephone.wordpress.com/2011/02/06/how-to-use-the-obihai-obi100-or-obi110-voip-device-as-a-gateway-between-asteriskfreepbx-and-google-voice-andor-the-obitalk-network/
I can't get the Asterisk server to use the OBi110 as an outbound route trunk.
Incoming line calls are routed without issue. But GV does not. GV does work with the phone port but only outgoing incoming GV are not picked up.
What I want to have happen is have my POTS and GV calls coming in go to my asterisk server AND have asterisk use GV first for outbound (if available) then use POTS. (Emergency calls use only POTS)
It's very frustrating as I know I must be missing something but I can not get it to work. I have tried doing it from scratch many times but I haven't had any luck.
My Asterisk is AsteriskNow 2.8 with FreePBX
My Obi110 is using the Feb 19 2011 firmware
both are on the same network and subnet.
Can someone please help me? (BTW sorry if this is the wrong section)
justin:
This is driving me mad! I don't understand how I can make this work.
MichiganTelephone:
justin, I'm having a little trouble understanding your issue (maybe it's too early!) ;)
So let's deal with one thing at a time. You say your incoming GV calls are not being routed to the Asterisk server but your calls from the Line port are. My first question is, do you know for a fact that the GV account is working and properly registering? What happens when you call the GV number? Do any of the lights on the OBi device start flashing quickly (after about one ring or so)?
Is your Google Voice account on SP1 and your Asterisk trunk on SP2?
Did you go to Voice Services, SP1 Service and modify the X_InboundCallRoute string to SP2 and then in parenthesis the 10 digit number of your Google Voice line, as the instructions say?
And then in FreePBX did you add an Inbound Route with the 10-digit Google Voice number as the DID?
Can you watch the Asterisk CLI and see if it gives any indication that it sees the incoming Google Voice call?
I just would like to know beyond the shadow of a doubt that you have your Google Voice account set up correctly in the device before trying to tackle your outgoing routing.
justin:
OK, Im not sure what has changed but I now have it set that GV will come into Asterisk BUT the linein port is not connecting to asterisk now. :(
GV is on SP1
Asterisk trunk is SP2
I have modified the x_inboundcallroute. it is set as "SP2('mygvnumberhere')"
I have 2 inbound call routes 1 set as my POTS line and 2nd set as my GV line.
How can I use the CLI for debugging?
justin:
My SP2 Service Status is set as
Register Failed: 403
I have confirmed the password set on my trunk matches my sip credentials. AND I set the AuthUserName as my GV number and URI to GV10digit@proxyseverip
Navigation
[0] Message Index
[#] Next page