I could not find a complete list of which changes are needed for Using OBi outside the U.S. I am setting up for use in Brazil. Below, are all the parameters I changed, in the order they appear on the OBiTALK Expert interface.
I changed the RingProfile and ToneProfile B so I could use the default Profile A with Google Voice on SP1. I believe the ring and tone profile could be left unchanged and all would function properly. Changing the profiles duplicates the experience a caller would have using a PTSN line in the country of use. If I add other changes, I will add to this post.
The important Setting here in addition to the Digitmap and CallRoute, is the
DisconnectTone Pattern. If this is not correct, and is used by the phone system you are interfacing with, the call might not be recognized as finished , when the call is ended.
Larry
CHANGES FOR INTERNATIONAL USAGE ( Example-BRAZIL)
PHONE PORT
DigitMAP (Details not Shown Here)
OutBoundCallRoute (Details not Shown Here)
PrimaryLine PSTN Line
Tone Profile B
LINE PORT:
RingProfile B
ToneProfile B
DisconnectTone Pattern 425-30,425-30;10;(.25+.25)
TONE PROFLIE B:
Dial Tone 425-18,425-18,450-18;20
Second Dial Tone (U.S.) 350-18,440-18;20
Ringback tone 425-18;-1;(1+4)
Busy Tone 425-18;10;(.25+.25)
Reorder (Congestion) 425-18;10;(.75+.25,.25+.25)
Confirmation (Function Acknowlege) 425-18;1;(.1+.1,.1+2)
RING PROFILE B
Call Waiting Tone 1 425-18;30;(.05+1)
Ring Pattern 1 60;(1+4,1+4)
Here is a link for a list of tones in various countries:
http://www.hackcanada.com/blackcrawl/telecom/tones.txt