difficulties setting up localphone .com
carl:
Thanks Ron. Works great. (Except that Localphone did not fix my account yet so the calls do not go into voicemail if nobody picks up. :()
However, one thing has to be kept in mind for everyone using the 3600HGV gateway that it really has to be reconfigured after any change in Obi.
BTW is there any good manual teaching an interested person how to do this ATA programming ?
RonR:
Quote from: carl on December 21, 2011, 02:26:44 pm
BTW is there any good manual teaching an interested person how to do this ATA programming ?
The OBi Device Administration Guide is the only reference for the OBi100/110.
carl:
Is there any way to incorporate one or more of the Star Codes into the dialing pattern ( e.g.*67) ?
RonR:
Quote from: carl on December 21, 2011, 04:17:01 pm
Is there any way to incorporate one or more of the Star Codes into the dialing pattern ( e.g.*67) ?
Sure. Simply add them to the beginning of the appropriate trunk's DigitMap. For example, if you need *67 and *69 to go out SP2 instead of being acted upon by the OBi, set:
Service Providers -> ITSP Profile B -> General -> DigitMap : (*67|*69|...)
carl:
Now a new problem popped up : My incoming calls through Localphone get disconnected after four rings before Localphone voice mail can pick them up. 4 rings, then 3 short beeps and that's it. If Obi is off line the calls are properly routed to the voice mail. Any idea ?
Navigation
[0] Message Index
[*] Previous page