October 15, 2019, 10:30:43 pm *
Welcome, Guest. Please login or register.
News:
 
   Forum Home   Search Login Register OBiTALK  
Pages: [1]
  Print  
Author Topic: Ooma Telo Phone Port to Obi FXO - Caller ID Passed Correctly?  (Read 6389 times)
SimonD
Newbie
*
Posts: 6


« on: December 22, 2011, 06:50:29 pm »

I just got Ooma. Could someone with Ooma Telo (phone only port) and an Obi110 confirm that with the Ooma phone port connected to FXO of an Obi110 and DECT 6 phones connected to the Obi110 Phone port that Caller ID for calls to the Ooma get passed through correctly?

I need to get a new ATA since this setup causes Caller ID to fail when I connect the Ooma to either a UTStarcom or Azatel ATA FXO port (both unlocked former Lingo). I hadn't expected this issue as they worked fine with a current Lingo SPA2102-R connected to the old Lingo ATAs but for some reason the Ooma Caller ID doesn't get passed through.

Thanks in advance.
Logged
bryanlyle
Newbie
*
Posts: 13


« Reply #1 on: January 10, 2012, 10:34:12 am »

In my set up is works sporadically.  I've tinkered with the RingDelay setting but it doesn't seem to make a difference.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC