Help with Obi110 in India
ashinusa:
I have had an Obi110 in India for a few months. I want all incoming calls on PSTN to route to my Obi in USA. I have the Line port to call ob(my OB number) but I have never got it working.
Also when I dial using the AA to connect to PSTN in India, the connection is not consistent. At times it goes just fine. On other days I will get an initial ring for a few seconds before it just hangs up the Obi for a few minutes.
Any help is appreciated.
Thanks in advance!
RonR:
Quote from: ashinusa on December 12, 2011, 10:38:33 pm
I have had an Obi110 in India for a few months. I want all incoming calls on PSTN to route to my Obi in USA. I have the Line port to call ob(my OB number) but I have never got it working.
This should be as simple as:
Physical Interfaces -> LINE Port -> InboundCallRoute : {pp(ob200123456)}
Incoming calls to the LINE Port should ring the PHONE Port on the OBi whose OBiTALK number is 200123456.
Quote from: ashinusa on December 12, 2011, 10:38:33 pm
Also when I dial using the AA to connect to PSTN in India, the connection is not consistent. At times it goes just fine. On other days I will get an initial ring for a few seconds before it just hangs up the Obi for a few minutes.
Assuming the call is being bridged using the OBiTALK trunk, a bad Internet connection could explain it as the OBiTALK voice server here in the US is required to make such a connection.
ashinusa:
This is exactly what I had it setup for for the Line port but it doesn't work.
I was using an SP3000 before this and I wouldn't have any issues with connecting on outbound or incoming calls. So the net connection should be ok. They have a 2Mbps DSL line there.
Thanks
yhfung:
In order to find out the causes of the problem, you have to isolate the source of the problem.
1. Are your friend in India able to make Obitalk call to you by dialling your USA ObiNo without any failure?
2. If the answer is yes, then the Internet connection between the India and US is okay. Otherwise, there may have some problems in the Internet connection.
3. Modify the incoming route of OBi110 such that whenever every calls to your OBI110 PSTN Line, does your phone connected to the PHONE Port rings for each PSTN call without any failure?
If the answer is no, the cause of the problem is the ring detection of OBi110 is different from your India local telco.
YH
ashinusa:
1. Direct calls from Obi to Obi by picking up the phone work great. Voice quality is great.
2. That makes m think that the net connection is ok.
3. I will ask my parents to try this.
What things does the ring detection tone affect? Why am I not able to make outgoing calls(US Obi -> India Obi -> PSTN), where my call connects but the voice never carries across to either party.
Quote from: yhfung on December 16, 2011, 08:14:46 pm
In order to find out the causes of the problem, you have to isolate the source of the problem.
1. Are your friend in India able to make Obitalk call to you by dialling your USA ObiNo without any failure?
2. If the answer is yes, then the Internet connection between the India and US is okay. Otherwise, there may have some problems in the Internet connection.
3. Modify the incoming route of OBi110 such that whenever every calls to your OBI110 PSTN Line, does your phone connected to the PHONE Port rings for each PSTN call without any failure?
If the answer is no, the cause of the problem is the ring detection of OBi110 is different from your India local telco.
YH
Navigation
[0] Message Index
[#] Next page