Quote from: lzipin on December 15, 2011, 11:52:45 AM
What's the difference between the *78-enabled Do Not Disturb feature provided by the OBi110 and the GVoice feature?
Enabling Do Not Disturb on the OBi causes incoming calls on the LINE Port trunk to be ignored and incoming calls on the SP1, SP2, and OBiTALK Service trunks to report busy.
Quote from: lzipin on December 15, 2011, 11:52:45 AM
My cheap wireless phone has its voicemail notification happening (red light blinking, envelope icon displayed). Given that there's some bug (or design choice) in the OBi110, how do I clear the notification so that the light on the phone stops blinking?
Log into the OBi at the IP address returned by dialing ***1. You cannot do this from the OBiTALK Web Portal as the needed setting does not exist there.
Disable Auto Provisioning and reboot:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Go to:
Voice Services -> SP1 Service -> MessageWaiting
and uncheck the Default checkbox and click Submit. Unplug the power from the OBi. With the OBi powered off, clear the Message Waiting Indicator on the phone. If the Message Waiting Indicator on the phone returns with the OBi powered off, the problem obviously isn't with the OBi. Plug the OBi back into power and go back to:
Voice Services -> SP1 Service -> MessageWaiting
If the checkbox immediately to the right of this setting becomes checked and your phone again reports Message Waiting, it's the OBi that's turning it on. If the checkbox stays unchecked, the phone should not turn on its Message Waiting indicator.