Route a specific number through Service Provider 2

(1/2) > >>

Bravid:
Greetings, I'm trying to figure out how to route all outbound calls to a specific number over Provider 2. I'm confused by DigiMaps, etc., and need some direction.

The primary provider is Google Voice and the secondary provider is CallCentric.

Thanks!

Stewart:
Assuming that you mean outbound calls placed from the Phone port, to a number that is already in the correct format for Callcentric, i.e. you can presently dial **2 followed by the number and it connects ok on CC, you don't need to change any digit maps -- just follow the example for 911 posted by RonR here: http://www.obitalk.com/forum/index.php?topic=2076.0

Bravid:
Would this work?

{(<5551234567:>(Msp2)):sp2}

or does it need to be more like this:

{(<#:>):pp},{5551234567:sp2}

and does it matter where in the code it goes (can it be at the end)?

RonR:
Quote from: Bravid on December 20, 2011, 08:50:34 am

Greetings, I'm trying to figure out how to route all outbound calls to a specific number over Provider 2. I'm confused by DigiMaps, etc., and need some direction.

The primary provider is Google Voice and the secondary provider is CallCentric.


Don't modify the PHONE Port DigitMap or OutboundCallRoute.

If your PrimaryLine is SP1 and the number you want to force out SP2 instead is 12341234567, simply add:

Service Providers -> ITSP Profile A -> General -> DigitMap: (<**2>12341234567|...)

Bravid:
RonR,

That almost seemed to work. Here's what's in the call log:

      End Call
Call 10   12/22/2011    06:58:21   
Terminal ID   PHONE1   GoogleVoice1
Peer Name      
Peer Number   1717299xxxx   **21717299xxxx
Direction   Outbound   Outbound
06:58:21   New Call   
06:58:24      End Call

It did dial **2 before going out, but it looks like it was still routed through GV on provider 1 instead of provider 2.

Navigation

[0] Message Index

[#] Next page