How to dial out using SP2

(1/4) > >>

Hortoristic:
Got GV working great on SP1.  Needed service for cheap calling to UK so configured SP2 using voip.ms

What sequence do I push when I turn on phone to use SP2 instead of GV on SP1?

I thought it was something like **2 (then UK phone #)

RonR:
**1 + Number  ->  SP1 Service
**2 + Number  ->  SP2 Service
**8 + Number  ->  LINE Port
**9 + Number  ->  OBiTALK Service

Stewart:
Quote from: Hortoristic on December 20, 2011, 07:26:57 pm

I thought it was something like **2 (then UK phone #)
That's correct.  Depending on how you have VoIP.ms set up, you would dial e.g. **2011442071234567 .  If it doesn't work, look at Call History in the OBi, to see what it sent to VoIP.ms and what error was returned.

BTW, I assume that you are calling landlines.  IMO, VoIP.ms rates to UK mobiles are too high and there are many other choices.

Hortoristic:
SP1 - GV
SP2 - Voip.MS

Using my iphone OBion app I'm able to place calls by hitting speed dial #2 (home) - then **213601231234 - and voip.ms collects a penny for placing a call.

However; dialing **213601231234 from handset results in fast busy signals - seems **(anything) gets me fast busy signals.

Hortoristic:
One other config change was I followed the instructions to change how 911 is routed - it dials an emergency number in my county instead of the PTSN dial out for 911 - did that somehow break my **(some #) ?

Navigation

[0] Message Index

[#] Next page