How to dial out using SP2
Hortoristic:
I made that change but dialing **2 still gives me fast busy. Are you sure we didn't just break my 911 calling? It used to call 13605338765 via SP1 when I dialled 911 and was working good.
RonR:
Quote from: Hortoristic on December 20, 2011, 08:37:08 pm
I made that change but dialing **2 still gives me fast busy. Are you sure we didn't just break my 911 calling? It used to call 13605338765 via SP1 when I dialled 911 and was working good.
Doesn't it still? What you had would have dialed 911 properly (and still should), but you had broken the ability to dial # and get a direct connection to the LINE Port.
Did you get the DigitMap for SP2 from?:
Service Providers -> ITSP Profile B -> General -> DigitMap
Hortoristic:
ITSP Profile B General > Digitmap:
(*75xx|*9x|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*]@@.)
Hortoristic:
I had followed these two changes to make 911 calls:
http://judsonsnotes.com/notes/index.php?option=com_content&view=article&id=531:obi110-voip-phone-setting-up-911&catid=37:tech-notes&Itemid=59
RonR:
Quote from: Hortoristic on December 20, 2011, 08:48:38 pm
I had followed these two changes to make 911 calls:
http://judsonsnotes.com/notes/index.php?option=com_content&view=article&id=531:obi110-voip-phone-setting-up-911&catid=37:tech-notes&Itemid=59
Those instructions are wrong. You should NOT make any changes to the PHONE Port DigitMap and you should make the change I gave you to the OutboundCallRoute.
Navigation
[0] Message Index
[#] Next page
[*] Previous page