Obihai firmware 1.3

(1/3) > >>

loadii:
I upgraded my device to the latest firmware 1.3.  Since the upgrade the device appears to kill my internal network.  Not exactly sure what it is doing, the Ethernet port where the device is connected to is constantly blinking as if it is sending/receiving data.  While it is doing that, all my computers can't ping each other anymore.  The minute I unhook the Obi device, everything goes back to normal.

I am using Google Voice.

Any help would greatly be appreciated.

thanks

RonR:
You might try the following the following steps:

1. Dial *** 0

2. Enter option 27 and press #

3. Press 1 to set a new value

4. Enter a value of 1 and press #

5. Press 1 to confirm/save

6. Hang up

7. Wait for the OBi to reboot

loadii:
Hi

Thanks for your reply.  What will this sequence do?

RonR:
It will change the Ethernet port on the OBi from 10mbs/half-duplex to 100mbs/full-duplex.

loadii:
Thanks.  This procedure fixed the problem.

Navigation

[0] Message Index

[#] Next page