Reuse PTSN line as 2nd line off Obi110

<< < (2/2)

RonR:
PAP2 is the model number of an older Linksys Analog Telephone Adapter (ATA).

If you don't have an ATA or hardware VoIP phone laying around, it probably makes more sense to buy an additional OBi.

If you don't need a physical telephone for additional calling capability, you could use a softphone like X-Lite along with OBiAPP for PC on your PC.

Hortoristic:
I have a couple Vonage adapters. One old school router and other is newer adapter. Are they hardwired only for Vonage though? $45 for Obi prob easier than trying to introduce dif hardware.

RonR:
My PAP2's were intended for Vonage use.  They are often locked (the Admin password is known only to Vonage) and Vonage won't unlock them for you.  If yours are (or can be) unlocked, they're probably usable.  You might visit DSL/Broadband Reports for unlocking possibilities/instructions.

Using another OBi would allow much easier configuration plus the ability to have two more providers, all accessible from either unit.

Hortoristic:
And it sounds like with the RollOver options and such I could have a 2nd and 3rd GV # and 1 of the 4 to maintain my international calling that I'm using voip.ms for.

Sounds all good until I have to pay for more lines (when GV changes) - with voip.ms anyhow each DID is $4 a month I think.

Navigation

[0] Message Index

[*] Previous page