Call Details from Obitalk
Hortoristic:
Am I only able to see call details from local IP admin of Obi device? If so - maybe I need to do some portforwarding so I can access my device from a web browser.
I see my wife called UK on default line instead of using SP2 (voip.ms) - she insists she dialed **2 when making hte call - I think the call detail on Obi device will technically tell me what she really dialed - but I can't see GV errantly charging me when dialing out SP2 when only SP1 has GV.
Everton:
Connecting through OBiTalk, you should be able to look at the last 10 calls made from the OBi device. This is exactly the same as the last 10 calls shown when directly connected to the device.
Why not setup the OBi device to automatically route dialed calls to the UK through SP2, without the need to dial **2. The forum has many examples as to how this can be done! That way, your wife does not have to remember to dial **2 to select SP2.
Hortoristic:
I really am trying to find information myself and am unsure which keywords to search on to route my international dialing (starting with 011) to dial out on SP2?
Sorry to be so lame...I am still looking at manual but somewhat stuck
RonR:
To route an international call starting with 011 through SP2, simply dial:
**2+011+country code+number
If your PrimaryLine is set to SP2 Service, the **2 service route access code is not required.
Hortoristic:
Everton was suggesting that I could set a rule that if I began a call with "011" - on default SP1 it could be re-routed through SP2 - did I misunderstand?
dialing **2 (plus number) is how I usually dial long distance using SP2 - but isn't Everton suggesting by setting up rules it can auto dial out SP2 on a digit match?
Navigation
[0] Message Index
[#] Next page