Howto make OBi accept SIP registration

<< < (2/3) > >>

RonR:
What is the SP2 InboundCallRoute?

Is this still what's being sent to the OBi?:

To: <sip:0000000@192.168.11.26:5061>

weiqj:
It's set to L1.
Below is the reject sent to 3CX. I replaced my cell phone number to XXXXXX.

<7> SIP DLG reject: 503
<7> sendto c0a80bfe:5060(405)
SIP/2.0 503 Service Unavailable
Call-ID: M2FlZmFkZDkwNDFlOTEwOGE3Y2I3YTExNzcxNjNkMDk.
CSeq: 1 INVITE
Content-Length: 0
From: "Dad"<sip:10001@192.168.11.254:5060>;tag=50310c47
To: <sip:XXXXXXXXX@192.168.11.26:5061>;tag=SP2469b1d3b5a1d0ff7
Via: SIP/2.0/UDP 192.168.11.254:5060;branch=z9hG4bK-d8754z-de7e6b1699337370-1---
d8754z-;received=192.168.11.254;rport=5060
Server: OBIHAI/OBi110-1.3.0.2651

RonR:
Quote from: weiqj on December 28, 2011, 03:10:24 pm

It's set to L1.


That's not a valid InboundCallRoute value.  Please tell me what the vaue is at:

Voice Services -> SP2 Service -> X_InboundCallRoute

weiqj:
Sorry I set it to "LI1" according to this documentation: (default is ph)

http://www.3cx.com/forums/solution-to-using-obi110-with-3cx-phone-system-v10-21295.html

I am still getting 404 error.

<7> sendto c0a80bfe:5060(337)
SIP/2.0 404 Not Found
Call-ID: NjI5NTRkODI1YzNmMjRlNzRkMTk0OGY0YTYwOGJhZWI.
CSeq: 1 INVITE
Content-Length: 0
From: "Dad"<sip:10001@192.168.11.254:5060>;tag=ef21880c
To: <sip:XXXXXXXXXX@192.168.11.26:5061>
Via: SIP/2.0/UDP 192.168.11.254:5060;branch=z9hG4bK-d8754z-a739cd6aa14ab755-1---
d8754z-;received=192.168.11.254;rport=5060

RonR:
Let's take small steps...

Set:

Voice Services -> SP2 Service -> X_InboundCallRoute : ph

and see if a call to any number rings the OBi PHONE Port.  This has to work before going any further.

Navigation

[0] Message Index

[#] Next page

[*] Previous page