How to configure OBi to make calls to three countries?
larrybob:
There is a way to do what you want ..... not too difficult.... if you want private message me so i can understand exactly what you are looking for.. Larry
Stewart:
Quote from: larrybob on December 29, 2011, 09:42:11 pm
There is a way to do what you want ..... not too difficult.... if you want private message me so i can understand exactly what you are looking for.. Larry
Why the secrecy? If you have something to sell that is a good value, others may be interested.
Of course, spamming is prohibited, but take a look at the last forum, titiled North American ITSPs. It's clearly labeled "Where ITSPs can post OBi-relevant information about their services". Put a description of your offering there, along with a reference in this thread.
DaveTap:
I would get a free PBXes.com (or similar) account and set up one or two of the Betamax providers mentioned in that. Set up all your Obis with a unique Google# as one provider and PBXes extension as the other. (You're allowed up to 5 free extensions and 5 providers in PBXes) Then set up dial rules in PBXes to select correct provider for each country you call.
Stewart:
Quote from: DaveTap on December 31, 2011, 03:36:04 am
I would get a free PBXes.com (or similar) account and set up one or two of the Betamax providers mentioned in that. ...
PBXes provides no benefit in this application; it would only add latency and a possible point of failure.
I believe that Betamax providers do not require registration, so you can configure a separate VGx in the OBi for each provider, then use the digit maps to select the desired provider for each destination.
Of course, if you needed two or more SIP providers that do not accept unregistered calls, PBXes would be a good solution.
hwittenb:
To expand on what Stewart is saying, with the OBi you can even make things simpler if you just have a limited number of numbers you call by using OBi speed dials. You can setup up to 100 speed dial numbers and it is possible to setup each one with a different voip provider assuming the provider allows unregistered calls and you have an account with the provider. You don't even have to go to the trouble to setup a VoiceGateway for them. You just need to have one Sip Provider setup under SP1 or SP2. With a speed dial you just dial xx# where xx is the speed dial number.
This capability was added in OBi firmware maintenance release 1.2.1(2283)
You may now append these URL parameters to speed dial and SIP Gateway VG1-8 access number, separated by ';',
- ui=userid[:password]
- ui=user-info, password is optional
- op=[ i ][ m ][ n ][ s ] ;option flags, i=ice, -m=symmetic-rtp, n=natted-address, s=stun
Examples:
SpeedDial = sp2(1234@sip.inum.net;ui=1000:xyz;op=sm)
VG1-8 AccessNumber = SP1(sip.inum.net;user=1000;op=imns)
Navigation
[0] Message Index
[#] Next page
[*] Previous page