There needs to be a better way
Corollace:
Ron,
I read your some posts, they are realy helpful. I have a couple of questions:
1. my settings: sp1: GoogleVoice, sp2: FreephoneLine (local number), Gateway3: voip.ms
sp2 is primary line
everything is working fine, but I would like to approach:
1. dial 1xxxxxxx, it will go to sp1: google voice (this is only for calls to U.S. )
2. dial xxxxxxxxxx without leading1, it should go to sp2: Freephone line.
3. how can I set dial plan, when I dial phone number 1xxxxxxxxxx ( with 1 leading), it automatically goes to sp1. when I dial 10 digits number without leading 1, it will automatically go to sp2.
I know I can dial **1 will go to sp1, just try to avoid to dial **1 or **2 etc.
Thanks.
RonR:
Service Providers -> ITSP Profile B -> General -> DigitMap:
(<**1>1xxxxxxxxxx|[2-9]xxxxxxxxx||011xx.|(Mipd)|[^*#]@@.'@'@@.)
Corollace:
Quote from: RonR on January 07, 2012, 10:32:12 am
Service Providers -> ITSP Profile B -> General -> DigitMap:
(<**1>1xxxxxxxxxx|[2-9]xxxxxxxxx||011xx.|(Mipd)|[^*#]@@.'@'@@.)
Thanks Ron, It works! I remembered I did this but was not working, but when I copy yours today, all works!
Thanks again!
Corollace:
Hi Ron,
May I ask you a question regarding Tomato QoS settings for voip here? I knew it doesn't belong to Obi110 question, but sometimes my friend said not clear via voip. I really appreciate your help.
RonR:
Quote from: Corollace on January 09, 2012, 06:04:59 pm
Hi Ron,
May I ask you a question regarding Tomato QoS settings for voip here? I knew it doesn't belong to Obi110 question, but sometimes my friend said not clear via voip. I really appreciate your help.
I'm not an expert on Tomato QoS, but I've set it up with my VoIP equipment and Skype at the highest priority and nothing seems to interfere with them anymore. I'll help if I can.
Navigation
[0] Message Index
[#] Next page
[*] Previous page