There needs to be a better way
RonR:
Quote from: Rick on December 29, 2011, 01:35:25 pm
Here's what CallCentric told me to put in for SP2:
(*xx.|**275*x.|[3469]11|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|011xx.|xx.|(Mipd)|[^*#]@@.)
Try this instead:
Service Providers -> ITSP Profile B -> General -> DigitMap:
([3469]11|**275*xx.|1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxx|011xx.|(Mipd)|[^*#]@@.'@'@@.)
where aaa is your local area code.
If you need one or more Star Codes to be sent to Callcentric, add them at the beginning:
Service Providers -> ITSP Profile B -> General -> DigitMap : (*67|*69|*77|...)
Rick:
The only calls I want to go to CallCentric are 911. Everything else is to go through GV.
RonR:
Quote from: Rick on December 29, 2011, 01:57:29 pm
The only calls I want to go to CallCentric are 911. Everything else is to go through GV.
Then, technically, you don't need to worry about the SP2 DigitMap as 911 calls are handled as a special case from the main PHONE Port DigitMap and OutboundCallRoute. I still recommend you use the one I proposed so that if you ever add credit to your CallCentric account, you'll be ready to immediately make outgoing calls.
You might also find Sip Broker useful, which is what the **275*xx. rule is for. The Mipd and [^*#]@@.'@'@@. rules will allow you to call SIP URI's from Speed Dials.
Rick:
Thanks Ron! I'll play with this tomorrow before my alarm internet box arrives.
Rick
DaveSin:
Quote from: Rick on December 29, 2011, 02:15:19 pm
Thanks Ron! I'll play with this tomorrow before my alarm internet box arrives.
Rick
Rick:
Out of curiousity, which Alarm Box/Module are you using and which monitoring company are you using? Are you still going with the Cellular Unit as well? What will be the monthly monitoring cost with this monitoring company?
We are currently using a PAP2T-NA (ARIM) that is supplied by Alarm Relay. They want $144 for the provisioned PAP2T-NA, but if you already own one, they only require $10.00 payment for shipping their unit to you and you will have to send them your PAP2T-NA. Turns out we had a idle PAP2T after purchasing the OBi110. Alarm Relay only charge $8.95 per month, payable one-year in advance. There is a one-time setup fee of $35.00, so the first year it works out to be $11.83 per month. There is an additional $15/month for Cellular Monitoring.
BTW, there is no third party involve with the Internet Monitoring, as the alarm signals are sent directly to Alarm Relay, via a server located in the "Cloud".
Navigation
[0] Message Index
[#] Next page
[*] Previous page