Can't set up OBI 110
RonR:
The LAN ports on your router should talk to any Ethernet devices (PC, OBi, etc.) that are plugged into them. Does your PC have Internet access plugged into the same port you tried the OBi in?
Maybe there's a reason they were taped over (they're not normally packaged that way).
ChrisN:
Ok, now I'm connected and can access the obi through the browser again. (the ip address changed, I guess.)The test is now working as well. I'm not sure what was going on with that switch, but something was causing a problem. Thanks for your help.
ChrisN:
Quote from: RonR on January 04, 2012, 12:15:05 pm
Maybe there's a reason they were taped over (they're not normally packaged that way).
The tape said "insert CD before using" or something like that.
Well it worked for a while. I called the test number once and called myself from Skype and all was fine. But now there is no service again. Confusing.
RonR:
Recheck the configuration settings I pointed you too. If they've changed, delete the OBi from the OBiTALK Web Portal Dashboard, if you can reach it, and reconfigure the OBi manually. If they've changed and you can't reach the OBiTALK Web Portal, disable your Internet connection (turn off your modem) while you set the OBi up manually.
ChrisN:
Thanks so much for your help. Its working well now. Plugging directly into the router seemed to do the trick.
Thanks again,
Chris
Navigation
[0] Message Index
[*] Previous page