Line Out only works once after I reboot
RonR:
Great! Is that with EnableLINEPortBargeIn unchecked?
Judgeless:
Quote from: RonR on January 07, 2012, 01:35:54 pm
Great! Is that with EnableLINEPortBargeIn unchecked?
Yes
Do you know how I could use OBiON on my Android phone to do the same thing? I would like to connect the house using the app then press # to get the PBX dial tone?
RonR:
Try appending this to the beginning of:
Voice Services -> ObiTALK Service -> InboundCallRoute : {290123456>(<999:>):li},...
where 290123456 is your OBiON App OBiTALK number.
Dialing 999 from your OBiON App should be the same as dialing # from the OBi PHONE Port.
I couldn't get it to work with just # or 9 using OBiAPP for PC. It may be an X-Lite issue.
You can replace 999 with anything you like that works.
Judgeless:
Quote from: RonR on January 07, 2012, 01:53:14 pm
Voice Services -> ObiTALK Service -> InboundCallRoute : {290123456>(<999:>):li},...
That did not work. The other numbers on that line had a () arond them. I tried {(290123456)>(<999:>):li}, and it worked pefect. Thanks again.
I just setup EXT17 to forward to my cell. Now when someone rings my door bell it calls my cell and I can talk to them. This is a great device.
RonR:
The parenthesis aren't required and it works here without them. What I posted is what I tested with. They don't do any harm if you do include them.
Navigation
[0] Message Index
[#] Next page
[*] Previous page